Coil Field Test Tool

The coil field test tool evalutates data from a parallel sensor test.
Hence that the area where you measure should not be too noisy, sensors must not be over powered.
Coils must be parallel and horizontal.
Minimum distance at least 2 meters between the coils.
Keep 20 meters distance from the coils when recording (you, your laptop, your mobile phone).

Don’t record too long. Here we evaluate the magnetic field only - and this is varying. E.g. we take 3 minutes 64 kHz and 15 min 512 Hz; the 64 kHz can be filtered by 4x.

Joblists:

Software is part of new version of ProcMT

Bugs

• the data is used in the range of the existing calibration data; if you down filter too many times, the tool,crashes, when trying to access the calibration data.
  Solution: use the calibration data in the range of the data you want to evaluate. Mostly lowest sampling rate is should be 1 Hz.